华硕路由器N66U安装Transmission

1、第一步、格式化U盘成ext3，进入华硕固件的WEB　GUI页面，开启jffs空间。注意要二步操作，首先Enable JFFS partition，应用；然后再Format JFFS partition at next boot选是，应用，重启路由。第二步、telnet 192.168.1.1第三步、安装entware命令：entware-setup.sh选择1

2、第四步、安装nano编辑器命令：opkg install nano

3、第五步、安装Transmission命令opkg install transmission-daemonopkg install transmission-web

4、第六步、建立文件夹命令mkdir /mnt/sda1/Torrent/mkdir /mnt/sda1/Torrent/Incompletemkdir /mnt/sda1/Torrent/Watchmkdir /mnt/sda1/Torrent/Completed第七步、停止Transmission命令/opt/etc/init.d/S88transmission stop

5、第八步、修改路径。命令nano -w /opt/etc/transmission/sett坡纠课柩ings.json用光标找到"download-dir":"incomplete-dir":"watch-dir":三个开头的，修改后面的路径成以下这样。"download-dir": "/mnt/sda1/Torrent/Completed","incomplete-dir": "/mnt/sda1/Torrent/Incomplete","watch-dir": "/mnt/sda1/Torrent/Watch",按ctrl+x退出，y保存，回车

6、第九步：防火墙设置命令：nano -w /jffs/scripts/firewall-start加入以下语句。#!/bin/shiptables -I INPUT -p tcp --destination-port 51413 -j ACCEPTiptables -I INPUT -p udp --destination-port 51413 -j ACCEPT按ctrl+x退出，y保存，回车

7、第十步、启用命令：chmod a+rx /jffs/scripts/firewall-start/jffs/scripts/firewall-start/opt/etc/init.d/S88transmission start