路由器NAT映射

1、搭建实验环境，进行NAT映射测试，将内部服务器192.168.160.53映射为10.38.200.18，具体拓扑如下：

2、R1：interface FastEthernet0/0ip address 10.38.191.38 255.255.255.252ip route 10.38.200.18 255.255.255.255 10.38.191.37R2:interface FastEthernet0/0ip address 10.38.191.37 255.255.255.252ip nat outsideinterface FastEthernet1/0ip address 192.168.164.65 255.255.255.252ip nat insideip route 0.0.0.0 0.0.0.0 FastEthernet0/0ip route 192.168.160.53 255.255.255.255 192.168.164.66ip nat pool aaa 10.38.200.18 10.38.200.18 netmask 255.255.255.0ip nat inside source list 1 pool aaaaccess-list 1 permit 192.168.160.53R3:interface FastEthernet0/0ip address 192.168.164.66 255.255.255.252ip route 0.0.0.0 0.0.0.0 192.168.164.65做NAT时需要，ping或者访问流量激活后才有转换项：sh ip nat trans在R2上：Debug ip nat查看具体NAT转换信息