CHECK_NRPE: Error - Could not complete SSL

1、在监控端使用NRPE检测存活状态时提示“CHECK_NRPE:Error-Coul蟠校盯昂dnotcompleteSSLhandshake.”/usr/local/nagios/libexec/check_nrpe -H 被监控端IP

2、打开被监控端nrpe配置文件#vim /usr/local/nagios/etc/nrpe.cfg

3、在allowed_hosts中添加监控端IP地址

4、重启xinetd进程/etc/init.d/xinetd restart

5、将NRPE端口加入到防火墙

6、重启防火墙/etc/init.d/iptables restart

7、再次尝试查看NRPE状态发现已经正常了/usr/local/nagios/libexec/check_nrpe -H 被监控端IP